Instructions for use: step-by-step medical guidance
Clinical context and indications for the TechRing, MaxPR and Performance rings, plus patient instructions for setup, recording, uploading, light codes and troubleshooting.
FirmTech product line: descriptions of each of our products are in this document: Product descriptions.
Section 1: For health care providers
Clinical context and indications
The TechRing (smart monitoring device)
- Primary function: erectile function assessment via pressure sensor and strain gauge technology; venous leak prevention
- Clinical applications: NPT monitoring for psychogenic vs. organic ED differentiation; treatment response quantification (PDE5 inhibitors, testosterone replacement, cardiovascular interventions); cardiovascular risk screening
- Data output: firmness scale 0–10.0, duration, frequency, Erectile Fitness Score
- Validation: clinically consistent with the RigiScan gold standard; FDA-registered Class II, 510(k)-exempt medical device
- Clinical endorsement: Dr. Mohit Khera, M.D., M.B.A., M.P.H. (former president, Sexual Medicine Society of North America)
MaxPR and Performance rings (non-tech rings)
- Primary function: erection ring for venous leak prevention
- Clinical applications: erectile dysfunction, particularly sustaining erections
- Validation: FDA-registered Class II, 510(k)-exempt medical device
- Clinical endorsement: Dr. Mohit Khera, M.D., M.B.A., M.P.H. (former president, Sexual Medicine Society of North America)
Section 2: For patients
Product A: The TechRing
Detailed patient instructions for the TechRing are also available in the help center.
Pre-use setup
Battery management:
- Charge fully before first use (minimum 60–70% for 8-hour recordings).
- Charging indicators: red blinking → solid green when complete.
- Important: wrap the ring clockwise around the charger, as marked on the device.
App installation:
- Download the app from the app page (iOS/Android).
- All data are anonymized and shared only with explicit authorization to a physician or tech support.
TechRing operation protocol
Step 1: Device activation
- Short-press the power button (on the side of the ring).
- Confirm the blue light (device powered on).
Step 2: Bluetooth pairing
- Open the FirmTech app.
- Tap “PAIR” or “PAIR TECHRING”.
- Wait for a solid blue light (confirms connection).
Step 3: Starting a recording
- Tap “RECORD NOW” in the app.
- Look for 10 green flashes (confirms the recording has started).
- The app displays “Recording in Progress - Unpaired”.
- Normal behavior: Bluetooth disconnects during recording, so the device does not transmit while it is worn.
Step 4: Device placement
- Calibration period: allow 10–15 minutes for the pressure sensor to adjust before activity.
- Unhook the ring and stretch the loop open.
- Placement: position the testicles through the loop (penoscrotal placement).
- Latch the hook around the base of the shaft.
- Adjust the tension for comfort.
Device safety:
- The ring is designed not to restrict arterial inflow.
- It can be worn in the flaccid or erect state.
- Use only water-based or silicone lubricants (natural oils damage the device).
Step 5: Ending a recording
- Press and hold the power button for 3 seconds.
- Look for 3 red flashes (recording stopped, device off).
Step 6: Data upload
- Short-press the power button (turns the device on).
- Open the app and tap “PAIR”.
- Confirm the solid blue light.
- A blue progress bar appears (automatic upload).
- Complete the questionnaire: medications, alcohol, substances, clinical notes.
Step 7: Erection classification
- Tap the “Classify” icon on the home screen.
- Categorize the detected erections: Sleep / Solo / Partnered Sex / Other.
- Required: statistics populate only after classification is complete.
- When finished, “Classify” changes to “Classified”.
TechRing light indicator reference
| Light pattern | Meaning |
|---|---|
| Flashing blue | Device on, not paired |
| Solid blue | Device on, paired to phone |
| 10 green flashes | Recording started |
| Single green flash (during recording) | Confirmation signal |
| Pulsing red (off charger) | Low battery warning |
| 3 red flashes | Recording stopped, device off |
| Solid green (on charger) | Fully charged |
TechRing troubleshooting
| Issue | Solution |
|---|---|
| A short recording shows “Recording in Progress” indefinitely | Ignore the message and end the recording as normal (steps 5–6). |
| Upload fails | Check the battery is above 20%, keep the ring within 10 feet of the phone, and restart the app. |
| Erection not detected | Make sure the 10–15 minute calibration period was completed, and check that the pressure sensor (hook) is positioned on the ventral surface of the penis. |
Data management:
- Deleting recordings: open the recording list → press and hold the unwanted recording → confirm deletion.
Product B: MaxPR and Performance rings
- Unhook the ring and stretch the loop open.
- Placement: position the testicles through the loop (penoscrotal placement).
- Latch the hook around the base of the shaft.
- Adjust the tension for comfort.
- The Performance ring can be worn all night; the MaxPR no more than 90 minutes.
- Do not use oils with the rings; use only water- or silicone-based lubricants.
Was this helpful?
Thanks for letting us know.
Sorry about that. Tell us what was missing and we will help. Contact us